Torchmate
 
HYPERTHERM PLASMA CUTTER PRICES
 
Plasma cutter history   How a plasma cutter works   Selecting a plasma cutter
  CNC plasma
 
Sample cuts  
Plasma vs Hi-definition plasma vs Laser   Hypertherm Prices   Links to related sites
  
HYPERTHERM PLASMA CUTTERS
  
INTRODUCTION:
 
Many plasma cutters are available with one of two different kinds of torches.  The most familiar style is a manual torch, with approximately a 70 degree angle built into its head.  This permits it to be easily held in one's hand.
 
The other style torch is designed for use on a cutting machine.  Called a machine torch, it is a vertical, barrel shaped torch, with a gear rack built into its side to facilitate raising and lowering it.  Machine torches cost more than manual torches, but are necessary for satisfactory machine cutting.  Both types of torches are pictured below:
 

Plasma cutter with manual torch

 
Plasma cutter with machine torch
 
Hypertherm plasma cutter models and prices:
(Pictured here with manual torches)

 
In the unlikely event that your plasma cutter requires service, you no longer have to drive it perhaps 50 miles to your local Hypertherm dealer, leave it, and then drive back to pick it up.
 
Keep the original shipping container.  If your unit requires service, call our authorized Hypertherm service center to arrange a UPS pickup.  We will promptly service the machine and return it.  You don't have to leave your facility, and we pay all service-related shipping charges for your first warranty repair (up to one year).
 
Note that Hypertherm has increased the prices on most of these models.  The prices shown here will remain in effect until we receive the revised price schedule.
 
Powermax 190c - $1,095.00
(Manual torch only)

 
Compact unit 1/8" capacity unit with built-in air compressor -- ideal for portable use.  Operates on 115 or 230 volt current.  Output - 12 amps. Weight - 46 lbs.
 
Standard Equipment:
Power Supply with built-in compressor

PAC105 Torch with Lead 20' (6.1 m)
Spare Consumables
Work Cable with Clamp 15' (4.5 m)
Primary Power Cable 10' (3 m)
Powermax 380 - $1,395.00
(Manual torch only)

 
Portable machine with recommended 1/4" capacity.  Operates on 115 or 230 volt current.  Output - 27 amps.  Weight - 55 lbs.
 
Standard Equipment:

Power Supply

PAC110T Torch 20' (6.1 m)
Spare Consumables and Air Fitting
Work Cable and Clamp 15' (4.6 m)   
Powermax 600
  price with 25' manual torch - $1,995.00
  price with 25' machine torch - $2,195.00

 
Portable unit with recommended 3/8" capacity.  Operates on 230 volt current.  Output - 40 amps.  Weight - 47 lbs.
 
Standard Equipment:
Power Supply

Quick-disconnect Torch with 25' cable
Spare Consumables

Work Cable with Clamp
15 feet (4.5 m)

Primary Power Cable
 
Powermax 1000
  price with 25' manual torch - $2,645.00
  price with 25' machine torch - $3,185.00

  
Heavy duty machine with recommended 3/4" capacity.  Operates on 230 volt current.  Output - 60 amps.  Weight - 83 lbs.
 
Standard Equipment:
Power supply
Quick-disconnect Torch with 25' cable
Spare consumables
Work cable with clamp
15 feet (4.5 m)
Primary power cable

Powermax 1250
  price with 25' manual torch - $3,595.00
  price with 25' machine torch - $4,320.00

  
Heavy duty machine with recommended 7/8" capacity.  Operates on 230 volt current.  Output - 80 amps.  Weight - 96 lbs.
 
Standard Equipment:
Power supply
Quick-disconnect Torch with 25' cable
Spare consumables
Work cable with clamp
15 feet (4.5 m)
Primary power cable

Powermax 1650
  price with 25' manual torch - $4,795.00
  price with 25' machine torch - $5,350.00

  
Extreme duty machine with recommended
1 1/4" capacity.  Operates on 3 phase current.  Output - 90 amps.  Weight - 128 lbs.
 
Standard Equipment:

Power supply
Torch with 25' cable
Spare consumables
Work cable with clamp 15 feet (4.5 m)

Please call us with any questions!
(775)673-2200

Applied Robotics, Inc.
108 Jordan Taylor Ln.
Harwood, MD  20776

 

 

 

 

 

 

Hit Counter